It’s so easy to get to your requIred motif
Pfleiderer brings your design ideas to life
It’s so easy to get to your requIred motif
Pfleiderer brings your design ideas to life
“Individual” from the outset
The product for the whole interior: our digital printing experts have a wealth of experience acquired over many years and are there to assist you with your project from the initial contact through to delivery.
Our advantages for your desired motifs
1. The motif
You create your own personal motif. It can be your own photos, logos, illustrations, texts or compositions of these. For ideas, simply ask us about the Pfleiderer data pool, which you are free to use. We also offer you assistance from our own in-house graphic designers: changes in colour, format, scales or completely new designs to your own ideas are possible. There are no limits to creativity. Several motif parts on a board can be implemented easily, as well as a large multi-part motif.
2. The print
After you have submitted your print data, it is checked and prepared by Pfleiderer’s experts. You motif is printed digitally within the CMYK colour space. Colour adjustment to other colour systems (e.g. RAL, NCS, Pantone, HKS, etc.) is therefore only conditionally possible; the same applies to an approximation to the Pfleiderer plain colours. The quality of your Pfleiderer Individual decor depends on the quality of the print data you provide us with.
3. The core board
The motif is applied to the required coreboard. Melamine faced DecoBoard with a printable width of 2,050 mm enables a large design with minimum offcuts. HPL is characterised by its scratch and impact resistance and is also suitable for horizontal applications. A material mix made up of melamine faced DecoBoard, HPL, compact laminate and flat-bonded elements is also possible. We will be pleased to advise you on the choice of the correct texture for your motif.
What data is required?
Pixel data vs. Vector data
Pixel data is the name given to image data which is made up of individual image dots (pixels). To obtain a high-quality reproduction of such data, a certain resolution is required, so that the motif appears sharp and clear from a certain distance.
Vector data, mostly logos or graphics, do not consist of individual image dots, but mathematical functions instead. The advantage of this is that despite a relatively small quantity of data, the data is continuously scaleable without quality loss.
Products and formats
Our maximum board printing formats for HPL, HPL compact, bonded elements and DecoBoard depend on the desired production quantities and formats. You can find the data here.
Melaminharzbeschichtete Platte
Hochdruckschichtstoff
Kompaktschichtstoff
HPL-belegte Platte
A cutting plan is needed if a large motif is divided between several boards. A 15 mm overlap is necessary at the cutting lines to allow sufficient clearance for the trimmings.
Due to the production methods, slide differences in the dimensional accuracy can occur (shrinkage). To ensure you nonetheless obtain your required end format, we produce each motif with a standard all-round overfill of approx. 15 mm and corresponding cutting marks. For production reasons it is possible that the print area is not parallel with the edge of the board. Colour variations may occur during subsequent production of individual boards in relation to already-supplied boards.
You want a Pfleiderer product with an individual motif!!
Our product finder will help you with your inquiry – our Individual Professionals will receive your inquiry and contact you.